Description
FIREPLUG CDI for Arctic-Cat (Kawasaki) and John-Deere snowmobiles
FIREPLUG CDI is a direct replacement for the Kokusan-type CDI (listed below). It fits many Arctic Cat T1 models, Kawasaki engines, and John Deere Liquifire, Trailfire, and Sportfire snowmobiles. See the fitment list below for specific applications.
(Replaces Arctic-Cat 3001-462 and equivalent 3001-535 CDI models)
Uses Factory OEM-style connectors & terminals for direct plug-in to factory harness. No wiring changes necessary.
NOTE: Our FIREPLUG CDI housing is a slightly larger box than the OEM, however mounting holes will match original OEM mounting centers.
(typical stator for this type CDI / 1974 Arctic-Cat Panther stator shown)
*Closely follows OEM timing profile for true plug & play installation.
Please confirm your model matches below & CDI matches the terminal wiring in pictures before ordering. Typical engine is the Kawasaki T1 type . May fit other models that are not yet listed!
FITS THE FOLLOWING:
Arctic Cat Models:
Cheetah 340 (1974–1975)
Cheetah 440 (1974–1975)
El Tigre 250 (1973)
El Tigre 295 (1973–1974)
El Tigre 340 (1973–1974)
EXT 250 (1972)
EXT 290 (1972)
EXT 295 / 290A (1971)
EXT 340 / 340A (1971–1972)
EXT 399 (1971)
EXT 400 / 400A (1971–1972)
EXT 440 / 440A (1971–1972)
EXT Special 292A (1971)
EXT Special 340A (1971)
EXT Special 399A (1971)
EXT Special 400A (1971)
EXT Special 440A (1971)
Panther 340 (1971–1972, 1974–1975)
Panther 340A / 340A/K (1971–1972)
Panther 340J (1971)
Panther 340 F/C (1998–2000)
Panther 340 Kawasaki (1972–1974)
Panther 440 (1971–1972, 1974–1975)
Panther 440A / 440A/K (1971–1972)
Panther 440J (1971)
Panther 440S (1971)
Pantera 340 (1975)
Pantera 440 (1975)
John Deere Models
Liquifire 440 (1980–1981)
Sportfire 440 (1980–1984)
Trailfire 340 (1979–1982)
Trailfire 440 (1979–1981)
Trailfire 440 LX (1979–1981)
Kawasaki Models
Drifter 440 (1979–1980)
Interceptor 550 (1982)
Intriguer 440 (1978)
Intruder 440 (1978–1980)
Invader 340 (1978–1980)
Invader 440 (1978–1981)
LTD 440E (1981)
LTD 440M (1981)
NOTE: Review your CDI wiring to confirm ALL wire colors & terminal type match your application. List above may not be 100% accurate, as we cannot check every model, so is based upon the 01-143-20 aftermarket fitment listings.
Please check w/us if any questions before ordering
ORIGINAL KOKUSAN; CU11-32-30 / 01-143-20 CDI part numbers
WIRE LENGTH/ COLOR / TERMINAL TYPE
4″ RED (F) (charge)
4″ WHITE (M)(pulsar)
4″ BROWN (RING) (GND) extended 4″ GRAY flat blade (packard type)
4″ BLUE/BLUE (F) (coil)& BROWN (M) 3-POS RUBBER PLUG 2F1M
* Always check your timing when changing CDI’s to confirm it is set to factory specifications.
Best WARRANTY available!
