Description
3-Cyl Polaris FIREPLUG CDI: 79~91- 3-cyl Polaris Applications (flywheel models):
CENTURION 79/80, CENTURION INDY 500 81/82, INDY 600 (ALL 83~87), INDY 650 88/90
FOR 3-CYL EC60PL & EC65PL-01/02
Compatible with factory harness & mounting / OEM connectors
(Not for RXL650 EC65PL-03)
NOT FOR USE ON TX500, 72 / 73 STARFIRE (N/A ON ROTOR-TYPE FLYWHEEL)
COMPATIBLE 3-CYL STATOR VALUES:
79~Later 3-CYL FLYWHEEL TYPE STATOR VALUES
EXCITER COIL: BLACK to WHITE: 261-ohms
CONTROL COIL: GREEN to BLUE: 29.5-ohms
PULSER COIL: RED to WHITE: 20-ohms
(NOTE ALL VALUES ARE +/- 10%)
DESIGN BACKGROUND: This has been a popular conversion for early-model 3–cyl’s because of the Advanced / Retard curve function available after 1979. The Early CDI’s were “STRAIGHT-CURVE”, or basically no ignition curve. The 79 & later stator / CDI combination provided the much needed timing curve which provided much better overall engine performance.
The FIREPLUG CDI is compatible with the factory stator harness.
PERFORMANCE: The FIREPLUG CDI is a High-Performance replacement CDI for your Polaris sled. The FIREPLUG CDI provides a higher energy output, that outperforms the stock CDI in reliability and performance. This translates to quicker starting, better throttle response, stronger pull & cleaner burning. The FIREPLUG CDI connects directly to your factory harness.
The FIREPLUG CDI is manufactured using the best industrial-grade components available. The FIREPLUG is not a high-volume / mass-produced imported device. Every CDI unit is manufactured at HewTech Electronics in Michigan, tested and shipped directly to you. It doesn’t exist until an order is received. Ask anybody currently running our FIREPLUG CDI ignition units.
Thanks to Kurt Andrews for his Testing & Evaluation of the Polaris Triple CDI.
TIPS & SUGGESTIONS FOR PEAK PERFORMANCE USING THE POLARIS IGNITION SYSTEM:
- The Polaris ignition systems really have a great timing curve. To get those curves, components inside the CDI box & stator must work together. Be sure you have the correct stator & flywheel from 79 and later. Be sure the stator model matches the flywheel.
- Polaris ignitions are notorious for weak spark energy. We are willing to live with it because of the great timing curve, but it can catch you at higher RPM if you do not follow some guidelines. Typical low-energy issues will show up in missing at high-rpm missing, or not able to achieve the usual upper RPM you had with a standard CDI. Try this:
- USE B8ES or B9ES SPARK-PLUGS: Do not use the BR-type resistor plugs. The resistor limits energy to the gap. Doing away with NGK resistor caps and replacing with direct-contact (non-resistor) caps / copper-core wires will also allow more energy to the plugs.
- CLOSE THE PLUG GAPS: Ideally, you want as wide of gap as possible, without misfire. Typical for this ignition with race-fuel is 0.019″~0.020″ spark-plug gaps.
- When extremely cold outside, try a blend of good grade of PREMIUM fuel (non ethanol, like SHELL ULTRA) with your race-fuel. Race-gas is very high octane. The higher the octane, the higher the flash-point. Lower temperatures also increase the flash-point. The combination of race-fuel and cold temperatures, the higher-compression engines require additional energy to the plugs to fire the fuel. If the fuel takes longer to light up, this is just like retarding your ignition timing. Your engine will be hard starting in cold weather also for this reason, since the cold / high-octane fuel is difficult to fire. A blend will keep things lighting up where they should & it’s like advancing the timing & letting the fuel fire under the cold conditions. Try it & check your jetting! Most engines will like the blend better if compression is not over 160 PSI.
Contact us by E-mail anytime with questions
Phone: (810) 765-0820 (EST) (available most evenings)
